1022 See Thru Weaver Scope Mount

This mount allows use if iron sights while the scope, red dot or holographic sight is mounted to the rifle. Accepts standard Weaver rings. Black anodized aluminum construction, includes hardware.

This mount allows use of iron sights while the scope, red dot or holographic sight is mounted to the rifle carry handle. Accepts standard Weaver STANAG rings. Hard anodized aircraft grade aluminum construction, includes hardware.

This aluminum Picatinny rail attaches to the rifle or carbine forend using (3) screws allowing attachment of vertical forend grip, flashlights, lasers, bipods, etc. Hard anodized aircraft grade aluminum construction, includes hardware.

This polymer Pictatinny rail attaches to the carbine forend using (3) screws allowing attachment of vertical forend grip, flashlights, lasers, bipods, etc. Injection molded black polymer construction, includes all hardware.

This polymer Picatinny rail attaches to the rifle forend using (3) screws allowing attachment of vertical forend grip, flashlights, lasers, bipods, etc. Injection molded black polymer construction, includes all hardware.

The AR-15 carbine forend replaces the factory hand guards allowing attachment of vertical grips, flashlights and other accessories. The forend is constructed of aircraft grade, hard anodized aluminum. No permanent modification to the firearm is required. All mounting hardware includes.

This mount allows attaching Aimpoint, Burris or other 30mm red dot sights to rifles with Flat Top or Picatinny rail. this mount allows co-witnessing of iron sights with the red dot sights on flat top AR-15 rifles and carbines. Hard anodized aircraft grade aluminum construction, includes hardware.

This mount allows attaching 1" red dot sights or compact scopes to rifles with Flat Top or Picatinny rail. This mount allows co-witnessing of iron sights with the red dot sights on flat top AR-15 rifles and carbines. Hard anodized aircraft grade aluminum construction, includes hardware.

This belt clip allows insight M3/6 and similar light or lasers on your belt when not in use on pistols or rifles. Lights may be attached locking out the switch preventing accidental use, or hands free use of the lights freeing both hands. Injection molded black polymer construction.

This vertical grip attaches to forend rails, quad forend or any Picatinny rails. The grip provides a natural grip and operation of flashlights, lasers and other weapon mounted accessories. Injection molded black polymer construction.

The side sling swivel was originally developed for use with the M203 grenade launcher. the side sling swivel allows the use of tactical slings. the side sling swivel allows the sling to be mounted out of the way of lights, lasers and other weapon mounted accessories. Black oxide steel construction, includes all hardware.

The wrench aids in the removal and installation of the forends of AR-15 rifle and carbines. This item turns a difficult task into a simple action. Injection molded black polymer and steel construction.

This pad adds 1/2" length to AR-15 carbines equipped with four position collapsible stocks. The pad features U.S. and ordnance flaming bomb markings. the pad is molded after the original rifle grenade recoil pad for 1903 and Garand rifles. Injection molded black rubber construction.

This rail panel cover over 1913 Picatinny rails protecting the rail when not in use. the panel also provides a surface to hold rather than the uncomfortable rail. These are constructed of glass filled black polymer. The panels may be shortened to cover special lengths of exposed rails.

This rail panel cover over 1913 Picatinny rails protecting the rail when not in use. the panel also provides a surface to hold rather than the uncomfortable rail. These are constructed of glass filled black polymer. The panels may be shortened to cover special lengths of exposed rails. Pack includes four rail cover panels.

These magazines clamps hold two AK-47 metal magazines side by side for quick reloading. The clamps position the magazines both to face the same direction and that the loaded ammunition point in the same direction. this four pack will "jungle clip" two pairs of magazines. Two magazines clamps will clamp two metal AK-47 magazines. Injection molded black polymer construction. All hardware included.

These magazine clamps hold two AK-47 polymer magazines side by side for quick reloading. The clamps position the magazines both to face the same direction and that the loaded ammunition point in the same direction. This four pack will "jungle clip" two pairs of magazines. Two magazines clamps will clamp twp polymer AK-47 magazines. Injection molded black polymer construction. All hardware includes.

These magazine clamps hold two AR-15 polymer, steel & aluminum magazines side for quick reloading. The clamps position the magazines both to face the same direction and that the loaded ammunition point in the same direction. This four pack will "jungle clip" two pairs of magazines. Two magazine clamps will clamp two polymer, steel & aluminum AR-15 magazines. Injection molded black polymer construction. All hardware included.

This magazine loader was originally designed to load the (100) Round BETA drum magazine. The loader is slipped over any AR-15 .223 type magazine; five cartridges are dropped in and loaded by pressing the plunger. The process is repeated until the magazine is loaded. Injection molded black polymer construction.

This is an EXACT duplication of the original USGI M2 steel bipod for the M14 (also fits the M1A rifle). The bipod attaches directly to the rifle at the gas block. The bipod requires No modification to the rifle or any special mounts. The bipod legs are adjustable. Constructed of black oxide high carbon steel.

The high output flashlight is compact and built to hold up under difficult use. This flashlight offers the same features as other high quality flashlights at a fraction of the cost. The 1" diameter body allows the flashlight to be mounted to weapons via 1" scope rings on Picatinny rails. Black anodized aircraft grade aluminum construction.

The high output flashlight is ultra compact and built to hold up under difficult use. This flashlight offers the same features as other high quality flashlights at a fraction of the cost. Green anodized aircraft grade aluminum construction.

This rubber recoil pad is designed to replace the slippery curved 1022 plastic butt plate. the recoil pad adds 1' additional length of pull to the carbine stock. The rubber pads prevent the stock from slipping off your shoulder during shooting. Injection molded black rubber construction.

This rubber recoil pad is designed to replace the hard steel butt plate. The recoil pad adds 1" additional length of pull to the rifle stock. The rubber pads prevent the stock from slipping off your shoulder during shooting. Injection molded black rubber construction.

This pad adds 1" length of pull of AR-15 carbines equipped with four position collapsible stocks. The pad features a non-slip textured surface. The pad is molded after the original rifle grenade recoil pad for 1903 and Garand rifles. injection molded black rubber construction.

The recoil pad adds 1/4" length to Ar-15 carbines equipped with four position collapsible stocks. The pad features a non-slip textured surface. the pad is molded after the original rifle grenade recoil pad for 1903 and Garand rifles. Injection molded black rubber construction.

These floor plates add two additional rounds to factory Glock magazines. The floor plates provide additional gripping surface for a more positive control of the pistol. No permanent modification required. Constructed black inject molded polymer.

This hammer and punch set includes the most common size punches used for rifles, pistol and shotguns. The steel handled brass hammer, brass and polymer punches are housed in a sturdy polymer pistol styled case.

This hard anodized aircraft grade aluminum constructed adapter clamps the accessory rail on HK full size pistols. The rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails.

This hard anodized aircraft grade aluminum constructed adapter clamps the accessory rail on HK full size pistols. The rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails.

This hard anodized aircraft grade aluminum constructed adapter clamps securely on the accessory rail on HK 9mm & .40 Compact pistols. The rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails.

Coming Soon-Fall 2008

These floor plates add two additional rounds to factory Glock magazines. The floor plates provide addition gripping surface for a more positive control of the pistol. No permanent modification required. Constructed from black injection molded polymer.

Coming Soon-Fall 2008

This grip plug fills the void in the Glock pistol grip. The plug prevents debris from becoming lodged in the void. Constructed from black injection molded polymer. the plug installs and is removed easily, no modification required. Fits may vary.

The scope riser allows optics to be 3/4" of an inch. The riser ensures proper scope height without the need for extra high rings. The riser is quick detachable, held in place by a full length spring locking bar with two thumb screws. Accepts Weaver and STANAG rings on its Picatinny rail. Constructed of hard anodized aircraft grade aluminum.

The scope mount allows 1" diameter tube scope directly to the rifle. The mount ensures proper scope height without the need for extra high rings. The mount is quick detachable, held in place by a full length spring locking bar with two thumb screws. Constructed of hard anodized aircraft grade aluminum.

The scope mount allows 30mm diameter tube scope directly to the rifle. The mount ensures proper scope height without the need for extra high rings. The mount is quick detachable, held in place by a full length spring locking bar with two thumb screws. Constructed of hard anodized aircraft grade aluminum.

This loader allows AR-15 magazines to use pre-loaded stripper clips (not included). The loader is placed over the magazine. The plunger is replaced and depressed. The loader will also work with individual rounds of ammunition. Constructed of injection molded polymer.

This scope mount allows rifle scopes, holographic sights & red dot sights to be mounted solidly over the rifle receiver. The mount is extremely low profile. The mount makes contact with the receiver at four points of contact for rock solid accuracy. The magazine stripper clip guide needs to be removed for installation out. the mount accepts Weaver type rings on the Picatinny rail. No permanent modification required. Contructed of black oxide high carbon steel. All hardware included.

This scope mount allows rifle scopes, holographic sights & red dot sights to be mounted solidly over the rifle receiver. The mount is medium to high profile. The mount makes contact with the receiver at five points of contact for rock solid accuracy. The magazine stripper clip guide needs to be removed and replaced with a mount attachment for installation. The mount accepts Weaver type rings on the Picatinny rail. No permanent modification required. Constructed of black oxide high carbon steel. All hardware included.

The bipod is an exact duplication  of the original factory bipod. The bipod attaches to the rifle via the wide forearm attachment mount (not included). Constructed of black oxide high carbon steel.

This pad adds 1/2" length to AR-15 carbines equipped with six position collapsible stocks. The pad features U.S. and ordnance flaming bomb markings. the pad is molded after the original rifle grenade recoil pad for 1903 and Garand rifles. Injection molded black rubber construction.

This grip spacer allows the use of Glock 19/23 magazines in Glock 26/27 pistols. The spacer takes up the space between the bottom of the frame and the floor plate of the longer magazines. The spacer is held in place by a single allen screw. The spacer is textured to match the Glock pistol frame. Constructed from injection molded polymer.

This grip spacer allows the use of Glock 17/22 magazines in Glock 26/27 pistols. The spacer takes up the space between the bottom of the frame and the floor plate of the longer magazines. The spacer is held in place by a single allen screw. The spacer is textured to match the Glock pistol frame. Constructed from injection molded polymer.

This mount attaches to the AR-15 front sight tower. The mount allows mounting of side sling swivels, flashlights, lasers and other accessories. Constructed of black oxide high carbon steel.

The mount attaches directly to AK-47 type rifle with the attaching iron of the left hand side of the receiver. The mount is locked in place by three Allen head screws. the screws draw the mount against the rifle scope rail. The mount is designed to hold zero after removal. The mount is designed so that the iron sights and the scope may both be used. Accepts Weaver style rings on the Picatinny rail.

This vertical grip attaches to forend rails, quad forends or any Picatinny rails. the grip provides a natural grip and operation of flashlights, lasers and other weapon mounted accessories. Injection molded black polymer construction.

This flashlight is designed to attach directly to handguns, rifle & shotguns with accessory or Picatinny rails. the flashlight has a temporary or constant switch. A belt clip that the light may be carried in when not in use us included. Built to handle firearm recoil. Constructed of black injected molded high impact polymer. Accepts Streamlight M3/6 accessories.

This heat treated black oxide carbon steel wrench makes removing or installing the castle nut on carbine stocks simple. The wrench acts as a barrel bushing wrench on 1911 government model pistols.

This adapter allows the use of Weaver style rings on mounts designed to accept STANAG equipped optics. (Many HK claw mounts accept only STANAG equipped optics). The adapter allows the use of scopes, holographic and red dot sights. Constructed of hard anodized aircraft grade aluminum.

This extended mount allows use of iron sight while the scope, red dot or holographic sight is mount to the rifle carry handle. Accepts standard Weaver STANAG rings. Hard anodized aircraft grade aluminum construction, includes hardware. Measurement: 6 9/16^th inches long.

This mount allows Trijicon Reflex sight to the rifle carry handle. The mount places the reflex forward of the carry handle. The mount places the reflex forward of the carry handle allowing co-witness of the iron sights and optic. (Both sights visible at the same time). Hard anodized aircraft grade aluminum construction.

This mount allows attachment of the Eotech Holosight to the rifle carry handle. The mount places the Holosight forward of the carry handle allowing co-witness of the iron sights and optic. (Both sights visible at the same time). Hard anodized aircraft grade aluminum construction.

The adapter allows the mounting of a Harris or ATK folding bipod to rifles equipped with Picatinny or quad rails. Use PM003 on AR-15 rifles and carbines to attach adapter and bipod. Constructed of hard anodized aircraft grade aluminum.

The adapter allows the mounting of sling swivels to rifles equipped with Picatinny or quad rails. Use PM003 on AR-15 rifles and carbines to attach adapter and sling swivel. Constructed of hard anodized aircraft grade aluminum.

This stock assembly provides the Remington 12 gauge 870 shotgun with an AR-15 M4 (4) position collapsible stock and tactical pistol grip. Constructed from injection molded black polymer.

This stock assembly provides the Remington 12 gauge 870 shotgun with an AR-15 M4 (6) position collapsible stock and tactical pistol grip. Constructed from injection molded black polymer.

This stock assembly provides the Winchester 1300 12 gauge pump shotgun with a AR-15 M4 (4) position collapsible stock and tactical pistol grip. The set also includes a polymer forearm with Picatinny rails and a removable vertical foregrip. up to six additional shotshells can be carried on the stock with the removable shell holders.  Constructed from injection molded black polymer. All mounting hardware included.

This stock assembly provides the Winchester 1300 12 gauge pump shotgun with a AR-15 M4 (6) position collapsible stock and tactical pistol grip. The set also includes a polymer forearm with Picatinny rails and a removable vertical foregrip. Up to six additional shotshells can be carried on the stock with the removable shell holders. Constructed from injection molded black polymer. All mounting hardware included.

This stock assembly provides the Mossberg model 500/590 12 gauge pump shotgun with a AR-15 M4 (4) position collapsible stock and tactical pistol grip. The set also includes a polymer forearm with Picatinny rails and a removable vertical foregrip. Up to six additional shotshells can be carried on the stock with the removable shell holders. Constructed from injection molded black polymer. All mounting hardware includes.

This stock assembly provides the Mossberg model 500/590 12 gauge pump shotgun with a AR-15 M4 (6) position collapsible stock and tactical pistol grip. The set also includes a polymer forearm with Picatinny rails and a removable vertical foregrip. Up to six additional shotshells can be carried on the stock with the removable shell holders. Constructed from injection molded black polymer. All mounting hardware includes.

This tactical forearm for Ruger Mini-14/30 rifles attach solidly to the rifle barrel. The forearm provides Picatinny mounting rails at 12,3,6 and 9 O'clock locations. The forearm provides a solid 16" optic mounting platform. The Picatinny rails allow the attachment of numerous accessories. Solid aircraft grade aluminum black hard anodized construction. All mounting hardware included.

This tactical forearm for military and commercial M1 carbines attach solidly to the carbine barrel. The forearm provides Picatinny rails allow the attachment of numerous accessories. Solid aircraft grade aluminum black hard anodized construction. All mounting hardware included.

This block allows the user to work on and install parts to AR-15/M16 lower receivers. The vise block is locked into the users vise. The block slips into the rifles magazine well and held on place by the rifles magazine catch. Constructed of black injection molded polymer.

This lightweight folding 6" bipod was originally designed for use with SAW (Squad Automatic Weapons). The bipod is manufactured to USGI milspec. The bipod attaches to rifles with quad or Picatinny rails. The spring loaded bipod deploys instantly and folds securely when not in use. Constricted from black oxide carbon steel and aircraft grade aluminum.

This lightweight folding 9" bipod was originally designed for use with SAW (Squad Automatic Weapons). The bipod manufactured to USGI milspec. The bipod attaches to rifles with quad or Picatinny rails. The spring loaded bipod deploys instantly and folds securely when not in use. Constructed from black oxide carbon steel and aircraft grade aluminum.

This lightweight folding 6" bipod was originally designed for use with SAW (Squad Automatic Weapons). The bipod is manufactured to USGI milspec. The bipod attaches to rifles with sling swivel studs. The spring loaded bipod deploys instantly and folds securely when not in use. Constructed from black oxide carbon steel and aircraft grade aluminum.

This lightweight folding 9" bipod was originally designed for use with SAW (Squad Automatic Weapons). The bipod is manufactured to USGI milspec. The bipod attaches to rifles with sling swivel studs. The spring loaded bipod deploys instantly and folds securely when not in use. Constructed from black oxide carbon steel and aircraft grade aluminum.

This single point sling attachment replace the collapsible (4 or 6) position butt stock retaining plate. the sling attachment plate allows the use of a sling point sling to be looped thru the plate allowing the weapon to be worn on either the right or left side. The plate also allows the standard sling to be attached to the front sling swivel without affecting sling length when the stock is collapsed. Functions as wither a left or right handed attachment. Constructed of black oxide carbon steel.

The single point sling attachment replaces the collapsible (4 or 6) position butt stock retaining plate. The sling attachment plate allows the use of a single point sling to be attached to the plate allowing the weapon to be worn on either the right or left side. The plate also allows the standard sling to be attached to the front sling swivel without affecting sling length when the stock is collapsed. Functions as both a left and right handed attachment. Constructed of black oxide carbon steel.

These CNC machined carbon steel rings for 1" scope tubes and (20mm-36mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .230 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 1" scope tubes and (36mm-42mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .360 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 1" scope tubes and (36mm-42mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .443 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 1" scope tubes and (42mm-52mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .500 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 1" scope tubes and (42mm-52mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .924 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 30mm scope tubes and (36mm-42mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .365 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 30mm scope tubes and (40mm-52mm) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .576 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

These CNC machined carbon steel rings for 30mm scope tubes and (56mm and large) objective lens provide rock solid mounting. The ring height from the top of the rail/mount to the bottom of the scope tube is .839 of an inch. The rings clamp to Picatinny and Weaver rails. Black oxide carbon steel construction. All hardware included.

This CNC machined solid carbon steel Picatinny scope mount attaches to Remington short action rifles. The mount provides rock solid mounting of rifle scope, red dot and holograpgic sights. Black oxide carbon steel construction. All mounting hardware included.

Coming Soon-Fall 2008

This CNC machined solid carbon steel Picatinny scope mount attaches to Remington long action rifles. The mount provides rock solid mounting of rifle scope, red dot and holograpgic sights. Black oxide carbon steel construction. All mounting hardware included.

The Picatinny rail sling swivel allows the use of standard and tactical slings on weapons with Picatinny rail systems. The swivel may be attached to any point on the weapon where a rail is present. Constructed of black hard anodized aircraft grade aluminum with a standard military sling swivel. All mounting hardware included.

This rail adapter & riser block allows the attachment of M3/M6 tactical flashlights to any weapon where a Picatinny rail is present. The adapter places the flashlight at a point where it is easy to operate. The block also functions as a single slot scope riser block raising the optic 1/2 inch. Constructed og black hard anodized aircraft grade aluminum. All mounting hardware included.

 The offset side rail allows attachment of M3/M6 (other lights attach to Picatinny rails) type flashlights directly to the rifle or carbine forearm. Installation required permanent modification (drilling two holes in the forearm). The mount allows easy access to the weapon light without shifting your grip on the firearm. Constructed of aircraft grade, hard anodized aluminum. Includes all mounting hardware.

This mount allows the attachment of a side sling swivel and a flashlight to the front sight tower of M16/AR-15 weapons. The mount places the standard military sling swivel on the left side and the flashlight on the right side if the front sight tower. Constructed of black anodized aircraft grade aluminum. All mounting hardware included.

The tactical flashlight mounting rail allow the use of M3/M6 type flashlights on M16/AR-15 rifles without Picatinny rails. The mounting rail is easily attached using ordinary hand tools. the mounting rail maybe attached for either right or left handed use. Constructed of black hard anodized aircraft grade aluminum.

This rear sight attaches to M16/AR-15 flat top A3 upper receivers. The sight may be used as a back-up rear sight or a lightweight rear sight to co-witness with red dot or holographic sights. the sight locks in its upright position, a spring loaded release must be depressed to place the sight in the down position. The sight has both 0.199 inch and 0.73 inch apertures on the same sighting plane. This allows both apertures to be sighted to the same point of impact. The sight has four apertures so that rotating the dial in wither direction brings the next size aperture to view. the windage is adjustment using a standard A2 windage adjustment drum. One click allows 0.55 moa change on rifles and 0.65 moa change on carbines. Constructed of both black oxide carbon steel and black anodized aircraft grade aluminum.

This rear sight attaches to M16/AR-15 flat A3 upper receivers. The sight may be used as a back-up rear sight or a lightweight rear sight to co-witness with red dot or holographic sights. The sight locks in its upright position, a spring loaded release must is adjustment using a standard A2 windage adjustment drum. One click allows 0.50 moa change on rifles and 0.65 moa change on carbines. Constructed of both black oxide carbon steel and black anodized aircraft grade aluminum.

Many Ar-15/M16 type rifles are now equipped with Picatinny rail gas blocks without front sights. This fold down front sight attaches securely to the front gas block. The sight remains out of the way until needed, and easily flips up to the standard A2 front sight height. A spring loaded release must be depressed to place the height in its down position. constructed of black oxide carbon steel.

This tactical flashlight mount allows the use of a vertical forend grip with a tactical flashlight. The mount places the flashlight forward to wither the left or right side of the forend grip. This placement allows the user to easily reach the momentary to constant switch with the thumb of his support hand without changing his grip. Attaches easily to any weapon equipped with a Picatinny rail on the forearm. Constructed of black anodized aircraft grade aluminum.

The ambidextrous single point sling attachment plate replaces the collapsible (4 or 6) position butt stock retaining plate. The sling attachment plate allows the use of a single point sling to be attached to the plate. the plate allows the weapon to be worn on both the right and left side. Constructed of black oxide carbon steel.

The single point sling attachment plate replaces the collapsible (4 or 6) position butt stock retaining plate. the plate allows the weapon to be worn on wither the right or left side. the plate is reversible. Constructed of black oxide carbon steel.

The tactical Picatinny scope rail attaches directly to the integral bases on the RUGER 9mm & .40 W&W carbine. The mount allows the use of standard weaver rings and those for Picatinny rails. Red dot, holographic and other sights may also be used as well. The rail is constructed of black oxide, heat treated steel. No permanent modification to the firearm required. All mounting hardware included.

The tactical Picatinny scope rail attaches directly to the integral bases on the RUGER MINI-14 & MINI-30 carbines. The mount allows the use of standard Weaver rings and  those for Picatinny rails. Red dot, holographic and other sights may also be used as well. The rail is constructed of black oxide, heat treated steel. No permanent modification to the firearm required. All mounting hardware included.

The tactical Picatinny scope rail attaches directly to the integral base on the RUGER 1022 MAGNUM. The mount allows the use of standard Weaver rings and those for Picatinny rails. Red dot, holographic and other sights may also be used as well. The rail is constructed of black oxide, heat treated steel. No permanent modification to the firearm required. All mounting hardware included.

This four and five prong tool allows adjustment of front sights on AR-15/M16 rifles equipped with either A1 or A2 sights. Constructed of black oxide carbon steel.

This adapter allows the attachment of sound suppressors to the Walther P22 (.22 long rifle pistols). the adapter other accessories utilizing 1/2" x 28 TPI threads. Constructed of black oxide carbon steel.

This five prong tool allows adjustment of front sights on AR-15/M16 rifles equipped with A2 sights. Constructed of black oxide carbon steel.

This four and five prong tool allows adjustment of front and rear sights on AR-15/M16 rifles equipped with A1 sights. Constructed of black oxide carbon steel.

This magazine tube fits Benelli 12 gauge shotguns increasing the shot shell capacity by two shells. Constructed of black oxide carbon steel and hard anodized aircraft aluminum. All mounting hardware included.

This clamp securely attaches (12) gauge magazine extension tubes to the shotgun barrel. Constructed of carbon steel and epoxy coated to provide extreme durability and corrosion protection. No alteration required. All hardware included.

This rail cover provides a secure storage compartment that holds (2) 123A batteries or other parts. Fits firearms with Picatinny rails. The over all length is 6.25" and constructed of high impact polymer.

This hard anodized aircraft grade aluminum constructed adapter clamps securely to the accessory rail on smith and Wesson Sigma pistols. the rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails.

Coming Soon-Fall 2008

This durable injection molded magazine extension allows the Glock model 17 magazine to hold an additional (10) rounds of 9mm ammunition. No permanent alteration is required. All parts are included.

Coming Soon-Fall 2008

This durable injection molded magazine extension allows the Glock model 22 magazine to hold an additional (9) rounds of .40 S&W ammunition. No permanent alteration is required. All parts are included.

Coming Soon-Fall 2008

This heavy duty polymer forearm fits Remington (12) Gauge 870 pump shotguns. The Forearm has three sturdy Picatinny rails located at the bottom, left and right hand sides. these rails allow attachment of flashlights, lasers, vertical grips and other accessories directly to the shotgun. This eliminates the needs of remotes corded switches, barrel clamps and clutter. No modification is required. Uses factory hardware. Forearm wrench included.

The tactical ambidextrous pistol grip provides a positive and comfortable control of the firearm. The one piece grip is molded from a light weight nearly unbreakable polymer, there is nothing disassemble or come apart. The grip features universal finger grooves and an HK style web filling arch. The entire grip is textured to ensure a positive non-slip surface for even wet or gloved hands. No modification is required. Uses factory supplied hardware.

The black polymer dust cover prevents dirt, grime or sand from entering or collecting in or around magazine feed lips. Made from durable injection molded polymer these flexible dust covers stand up to repeated use and removal. Six magazine covers per package. Bulk pricing available upon request.

The black polymer dust cover prevents dirt, grime or sand from entering or collecting in or around magazine feed lips. Made from durable injection molded polymer these flexible dust covers stand up to repeated use and removal. Six magazine covers per package. Bulk pricing available upon request.

This heavy duty polymer forearm fits Mossberg 500/590 (12) Gauge pump shotguns. The Forearm has three sturdy Picatinny rails located at the bottom, left and right hand sides. these rails allow attachment of flashlights, lasers, vertical grips and other accessories directly to the shotgun. This eliminates the needs of remotes corded switches, barrel clamps and clutter. No modification is required. Uses factory hardware. Forearm wrench included.

The tactical charging handle latch offers a positive grip for gloved hands. Large gripping surface for easy operation. Allow easy access to the charging handle of flat topped rifles equipped with scopes. Constructed of steel, matte black finish. Charging handle pin and spring not included.